Custom Notch in Frame Generator

Дата публикации: 15-10-2026 15:05:21

Hi all,I am designing a pipe handrail using Frame Generator. Inventor's default notch style creates a standard boolean cut (shown in Fig 2), but I need to customize the cut to remove an extra piece of material (the red shaded area shown in Fig 1). I tried using the Perpendicular Cut tool, but it doesn't always work reliably. Is there a way to define and use a custom notch profile for this? Any guidance would be appreciated!Fig 1: Custom Notch  Fig 2: Default Notch

Схожие новости

#	Наименование новости	Тональность	Информативность	Дата публикации
1	Advance Steel vs. SDS/2: Why Is Our CNC Cutting Quality So Different?	0	6.79	15-10-2026
2	안녕하세요 선배님들 모델링 방법에 대해 문의드립니다.	0	16.9	15-10-2026
3	Problema de Familia Structural Framing Perfil Metalico Revit 2024	0	8.71	15-10-2026
4	Only @ mention the OP ( original poster) in follow up messages	0	3.62	12-05-2026
5	Inventor 2027. : Profil UPN	0	6.62	15-10-2026
6	Issue? Offset curves cannot properly identify internal profiles	0	19.45	02-08-2026
7	ISO 21920 - Surface texture: Indication of direction of lay relative to a workpiece feature	0	11.53	14-10-2026
8	Tangency rule of in-between profiles in multi-profile lofts	0	18.27	03-08-2026
9	Can iCopy instances in an assembly be easily tabulated?	0	5.33	15-10-2026
10	Vault Check In Blank	0	5.98	15-10-2026

Классификация: . Схожих патентов: 0. Схожих новостей: 10. Тональность: 0. Информативность: 11.4. Источник: forums.autodesk.com.