Просмотр новости
Найдите то, что Вас интересует
Спутники
РН
SpaceX
Роскосмос
NASA
СпутникиРНSpaceXРоскосмосNASAНазвание: Comparative Characterisation of Brazilian and Land Craft Industrial Steel Rebars: Microstructural, Wear, and Electrochemical Corrosion Behaviour
Авторы: Maureen Olere Oisakede; Kasturie Premlall; Abimbola Patricia Popoola
Пожалуйста, используйте этот идентификатор, чтобы цитировать или ссылаться на этот ресурс:
https://elar.urfu.ru/handle/10995/157766
| Название: | Comparative Characterisation of Brazilian and Land Craft Industrial Steel Rebars: Microstructural, Wear, and Electrochemical Corrosion Behaviour |
| Авторы: | Maureen Olere Oisakede Kasturie Premlall Abimbola Patricia Popoola |
| Дата публикации: | 2026 |
| Издатель: | Ural Federal University Уральский федеральный университет |
| Библиографическое описание: | Maureen Olere Oisakede. Comparative Characterisation of Brazilian and Land Craft Industrial Steel Rebars: Microstructural, Wear, and Electrochemical Corrosion Behaviour / Maureen Olere Oisakede; Kasturie Premlall; Abimbola Patricia Popoola // Electrochemical Materials and Technologies. — 2026. — Vol. 5. № 3. — № 20265075. |
| Аннотация: | This study presents a comparative characterisation of 16 mm Brazilian imported and locally produced Land craft industrial (LCI) reinforcement steel rebars through chemical analysis, ImageJ microstructural evaluation, sliding wear testing, and electrochemical corrosion assessment in 1 M H2SO4. Chemical analysis showed that Brazilian steel exhibited lower levels of detrimental impurities – sulphur (0.014 %), phosphorus (0.0097 %), and copper (0.013 %) – relative to LCI steel (0.056 %, 0.106 %, and 0.253 %, respectively), indicating superior compositional purity. Microstructural analysis revealed a significantly finer grain structure in Brazilian steel (average grain size: 201.94 𝜇m2; Feret diameter: 11.61 𝜇m) compared to coarser-grained LCI steel (1776.30 𝜇m2; 20.71 𝜇m). Sliding wear tests demonstrated that LCI steel lost less mass (0.029 g) than Brazilian steel (0.038 g) under identical sliding conditions, indicating better wear resistance attributed to its coarser, carbide-rich microstructure. Electrochemical evaluation, supported by open-circuit potential measurements, potentiodynamic polarisation curves, and scanning electron microscopy/energy dispersive spectrum (SEM/EDS) post-exposure compositional analysis, revealed distinct corrosion susceptibilities between the two steels in acidic medium: LCI steel showed a higher polarisation resistance (𝑅𝑝 = 23.8 Ohm vs. 6.0 Ohm), a lower corrosion current density (𝑖𝑐𝑜𝑟𝑟 ≈ 128 vs. ≈ 1267 𝜇A/cm2), and a lower corrosion rate (𝐶𝑅 ≈ 1.49 vs. ≈ 14.7 mm/y) than Brazilian steel, with compositional and microstructural differences playing a significant role. These results provide a quantitative basis for assessing the corrosion and wear behaviour of both imported and domestically manufactured reinforcement steels under the tested conditions. |
| Ключевые слова: | REINFORCEMENT STEEL BARS SLIDING WEAR ELECTROCHEMICAL CORROSION SEM/EDS ANALYSIS MICROSTRUCTURE OPEN-CIRCUIT POTENTIAL |
| URI: | https://elar.urfu.ru/handle/10995/157766 |
| ISSN: | 2949-0561 |
| DOI: | 10.15826/elmattech.2026.5.075 |
| Сведения о поддержке: | The authors wish to acknowledge all those who supported this work. |
| Источники: | Electrochemical Materials and Technologies. 2026. Vol. 5. № 3 |
| Располагается в коллекциях: | Electrochemical Materials and Technologies |
Файлы этого ресурса:
| Файл | Описание | Размер | Формат | |
|---|---|---|---|---|
| emt_2026_v5_3_04.pdf | 1,02 MB | Adobe PDF | Просмотреть/Открыть |
Все ресурсы в архиве электронных ресурсов защищены авторским правом, все права сохранены.
На сайте используются файлы cookies и аналитические сервисы. Оставаясь на сайте, вы прнимаете условия использования файлов cookies и аналитических сервисов.
The site uses cookies and analytical services. By staying on the site, you accept the terms of use of cookies and analytical services.