Просмотр новости
Найдите то, что Вас интересует
Спутники
РН
SpaceX
Роскосмос
NASA
СпутникиРНSpaceXРоскосмосNASAPublication date: 1 May 2026
Source: Nano Hybrids and Composites Vol. 51
Author(s): Samarth Shetty, Harsh Pawar, Prashant Reddy, Rega Venkat Dhananjai, Divya Padmanabhan, Komal Kadam
This study focuses on the development of sustainable composite materials for automotivebody panels by utilizing sugarcane bagasse and bamboo fibers reinforced with epoxy resin. Theagricultural by-products were first sun-dried, mechanically processed into fine powder, andchemically treated to improve interfacial bonding before being incorporated into the epoxy matrix.Composite specimens were fabricated through a controlled lay-up process and tested for flexuralstrength and impact resistance in accordance with ASTM standards. Experimental results revealedthat sugarcane bagasse composites exhibited the highest flexural strength of 47 MPa, while bamboocomposites contributed greater ductility and flexibility under load. Notably, a hybrid formulation ofbagasse and bamboo fibers achieved the best balance of properties, recording an impact resistance of187 J/m, which is comparable to commonly used polymers. These findings highlight that naturalfiber-based composites not only offer mechanical performance suitable for exterior automotiveapplications but also provide significant advantages in terms of weight reduction, cost-effectiveness,and environmental sustainability.
[1] Ramli, N. (2018). Natural fiber for green technology in automotive industry: A brief review. IOP Conference Series: Materials Science and Engineering, 368(1), 012012.
[2] Norhidayah, A. (2014). A review of current development in natural fiber composites in automotive application. IOP Conference Series: Materials Science and Engineering, 62(1), 012007.
[3] Elseify, L. A. (2021). Natural fibers in the automotive industry. In Manufacturing Automotive Components from Sustainable Natural Fiber (p.1–10). Elsevier.
[4] Huda, M. K. (2021). Natural fiber reinforced polymer in automotive application: A systematic literature review. Journal of Physics: Conference Series, 1796(1), 012014.
[5] Naik, V. (2021). A review on natural fiber composite materials in automotive. Materials Today: Proceedings, 47(7), 2102–2108.
[6] Abedom, F. (2021). Development of natural fiber hybrid composites using sugarcane bagasse and bamboo charcoal for automotive thermal insulation. Materials Today: Proceedings, 46(8), 5180–5185.
[7] Vidyashri, V. (2019). Preparation of chemically treated sugarcane bagasse fibre reinforced epoxy composites and their characterization. Cogent Engineering, 6(1), 1699348.
[8] Ang, X. Y., Hassan, C. S., Soh, S. Y., Olugu, E. U., Abdullah, N. F., Yu, L. J., & Abdul Aziz, N. (2023). Evaluation of Automotive Bio-Composites Crash Box Performance. International Journal of Automotive and Mechanical Engineering, 20(4), 10943–10952.
[9] Hassan, C. S., Pei, Q., Sapuan, S. M., Abdul Aziz, N., & Mohamed Yusoff, M. Z. (2018). Crash Performance of Oil Palm Empty Fruit Bunch (OPEFB) Fibre Reinforced Epoxy Composite Bumper Beam using Finite Element Analysis. International Journal of Automotive and Mechanical Engineering, 15(4), 5826-5836.
[10] Hussain, N. N., Regalla, S. P., & Rao, Y. V. D. (2017). Low velocity impact characterization of glass fiber reinforced plastics for application of crash box. Materials Today: Proceedings, 4(2), 3252–3262.